Need help?Do you have a question about the MGE UPS Systems PULSAR EVOLUTION 2200 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Topology | Line Interactive |
| Emergency Power Off (EPO) | Yes |
| Rack Height | 2U |
| Operating Temperature | 0-40 °C |
| Humidity | 0-95% non-condensing |
| Warranty | 2 years |
| Output Voltage | 230 V |
| Input Frequency | 50/60 Hz |
| Battery Type | Sealed Lead-Acid (SLA) |
| Number of Outlets | 8 |
| Communication Ports | USB |
| Noise Level | < 45 dBA at 1 meter |
| Power Rating | 2200 VA / 1980 W |
| Typical Backup Time at Full Load | 5 minutes |
Explains how to navigate the manual using contents and index.
Illustrates common symbols used in the manual for instructions and indications.
Details the physical appearance and dimensions of the Pulsar Evolution in tower and rack configurations.
Details the rear panel connections and components of the Pulsar Evolution 2200 and 3000/3000 XL.
Explains the front panel controls, indicators, and bargraphs of the Pulsar Evolution.
Lists and illustrates the components included in the UPS package for unpacking and verification.
Provides instructions for setting up the UPS unit in a vertical, tower orientation.
Details the procedure for mounting the UPS unit horizontally in a 19-inch rack.
Explains how to connect power cords to the UPS outlets and the AC power source.
Describes how to connect the UPS to a computer using RS232 or USB for communication.
Explains how to connect network lines for data-line surge protection.
Details the process of installing an optional communications card into the UPS.
Guides the user through the initial power-on procedure and status indicators of the UPS.
Explains how the UPS adjusts voltage during AC input variations to maintain output stability.
Describes UPS behavior during AC power failure, including battery transfer and low-battery warnings.
Explains how to configure UPS functions using the UPS Driver software.
Details settings for voltage thresholds related to battery power transfer and mode shifting.
Explains how to adjust the UPS sensitivity level for optimal performance.
Provides guidance for resolving common UPS issues and fault indications.
Details safety precautions and the step-by-step process for replacing the UPS battery module.
Presents the simplified block diagram of the UPS system.
Lists detailed technical specifications for Pulsar Evolution 2200, 3000, and 3000 XL models.
Provides graphical examples of expected battery backup duration for different load configurations.
Defines key terms and concepts used throughout the UPS manual.
An alphabetical index of topics covered in the manual for quick reference.
To Next Page