MGE UPS Systems PULSAR EVOLUTION 2200 - 2. Installation; 2.1 Unpacking and parts check

Page 10 - 34007115EN/AA
2. Installation
2.1 Unpacking and parts check
Cord for connection to the AC-power source for 3000/3000 XL versions only (for the 2200 version, use the power cord
of the protected equipment).
Two cords for connection of the protected equipment.
RS232 communications cable.
USB communications cable.
Telescopic rails for mounting in 19" bay with mounting hardware.
Two securing systems for equipment power cords.
CD-ROM with the Solution-Pac and UPS Driver software.
Product documentation.
Two supports for the upright position.
27
28
29
25
24
25
26
27
28
26
24
29
31
32
31
32
30
30
P U L S A R
Evolution
3 0 0 0