MHZ CLASSIC - Bracket and Dimension Data

MHZ carrier bar awning
CLASSIC
T1-34
Subject to technical changes, edition 03.2008
Measurement of axes A1, A2 in cm for installation on concrete
width of projection of awning in cm
awning
in cm
200 - 250
251 - 300
301 - 350
351 - 400
401 - 450
451 - 500
501 - 550
551 - 600
15
1)
40
40
40
60
70
2)
90
90
–
1)
15
40
40
60
70
2)
90
90
–
–
1)
15
40
60
70
2)
90
90
–
–
–
1)
15
40
40
90
2)
90
2)
–
–
–
–
–
1)
15
40
65
150 200 250 300 350
–
–
–
–
1)
15
40
65
2)
90
2)
400
TECHNIC AND DIMENSIONS
fabric width (width – 18 cm)
width
projection
Projection and measurement of center to center brackets
Brackets and joint arms (for installation on concrete)
Please note: Installation brackets should be fitted max. 10
cm away from arm bracket. For standard awnings the dimen-
sion A1 and A2 is the same. Support bracket should be pla-
ced in centre. Measurement of center to center brackets for
awnings with three and four joint arms on request. Special
measurement of center to center brackets for installation on
other substructure are optional possible. Please ask for form
sheet " measurement of center to center brackets " CLASSIC.
1)
1) minimum width of awning: if the awning is between
30 and 50 cm wider than the projection, then measurement
A1, A2 is between 8 and 14 cm.
2)
For guide bar PRISMA the measurement A1,A2 is 50 cm
projection
bracket joint arm
arm bracket
drop bar
width of number of number of
awning in cm brackets* joint arms
180 - 400
401 - 600
601 - 650
651 - 800
801 - 1200
2
3
3
4
6
2
2
3
4
4
AAddvviiccee
: deviating to this overview, for some system widths with projec-
tions of 300/350/400 cm more installation brackets will be delivered.
Please see overview "extraction forces and bracket sets (K-set) for the
accurate number of brackets depending on the installation substructure.