Miccus Home RTX 2.0 - Resolving Pairing and Dual-Link Issues

PROBLEM SOLUTION
Stac or noise in
the audio
1. Make sure to use the supplied USB
adapter as television, stereo, or PC
USB ports can introduce noise into
the signal. The Home RTX 2.0 ships
with a USB cable featuring a ferrite
core to help eliminate potenal RF
(radio frequency) interference.
2. Move the Miccus Home RTX 2.0 away
from any ampliers or powered
speakers.
3. Make sure the Miccus Home RTX 2.0
is cabled to the correct line level input
or output on your stereo receiver.
4. Dual link pairing: your rst receiving
device may experience an audio
interrupon / noise while your 2nd
receiving device is connecng. This
is due to audio buering. It may take
roughly 30 seconds for audio to
stream as normal.
Can’t pair my device
with the Home
RTX 2.0
1. Make sure the Miccus Home RTX 2.0
and the device you’re pairing with
are right next to each other.
2. Make sure all other Bluetooth
compable receiving or transming
devices you’re not trying to pair
with are either powered o or
Bluetooth disabled.
3. Make sure both devices are in
pairing mode. LED equipped devices
will typically ash fast when in
pairing mode and ash slow when
connected.
11
PROBLEM SOLUTION
Can’t pair my device
with the Home
RTX 2.0
4. Make sure your device is compable
with the wireless A2DP Bluetooth
stereo audio prole.
Can’t dual link pair
my devices to the
Miccus Home RTX 2.0
1. When the standard Dual-Link Pairing
procedure won’t connect more than
one device, follow standard pairing
steps 1-6 to pair both receiving or
transming devices individually
then power down the Miccus Home
RTX 2.0 and your second device.
Next, power on both receiving or
transming devices again then place
the Miccus Home RTX 2.0 into
pairing mode again. Wait for both
devices to reconnect. Both CH1 and
CH2 indicator lights will light solid
when reconnected.
Care and Maintenance
• To keep from damaging the Miccus® Home RTX 2.0’s internal circuit,
avoid exposure to liquid, moisture and humidity.
• Extreme temperatures can shorten the life of electronic devices.
• Don’t use abrasive cleaning solvents to clean the Miccus® Home
RTX 2.0.
• Do not dispose of the Miccus® Home RTX 2.0 in re as it will result
in an explosion.
• Avoid contact with sharp objects. They may scratch or damage the
Miccus® Home RTX 2.0.
• Do not drop: dropping the Miccus® Home RTX 2.0 can damage the
internal circuit.
12