Need help?Do you have a question about the Miccus Home RTX 2.0 and is the answer not in the manual?
Instructions for attaching the antenna to the device for optimal performance.
Guidance on connecting appropriate audio cables (Optical/TOSLINK or RCA to 3.5mm).
Steps for powering the device on and off, including using the multi-function button.
Process for pairing Bluetooth devices, including indicator light behavior.
Instructions for simultaneously pairing two Bluetooth devices for dual audio streams.
Identifies and describes key ports and indicator lights of the device.
Details on using the device as a transmitter (TX) or receiver (RX) with Bluetooth devices.
Explains supported codecs (SBC, AAC, aptX, aptX Low Latency) and pairing behavior.
Detailed steps for powering the device on/off and connecting audio cables.
Step-by-step guide for pairing Bluetooth devices when the RTX 2.0 is in transmit mode.
Steps for pairing the device in receive mode with a Bluetooth transmitter.
Explains how the device facilitates digital audio pass-through to multiple devices.
Troubleshooting steps for when the device fails to power on.
Solutions for audio interruptions, low range, static, or noise.
Steps to resolve issues with no sound or audio output.
Explanation regarding the lack of volume control on the device itself.
Solutions for problems preventing device pairing or dual link setup.
Information regarding FCC compliance and potential interference.
Key warnings about modifications, RF exposure limits, and device handling.
General| Bluetooth Profiles | A2DP, AVRCP |
|---|---|
| Power Supply | 5V DC |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| Audio Codecs | aptX, SBC |
| Inputs | 3.5mm audio jack |
| Outputs | 3.5mm audio jack |
| Compatibility | Bluetooth-enabled devices |
| Operating Range | Up to 100 feet (30 meters) |
To Next Page
