What to do if there is no sound/audio output from Miccus Home RTX Receiver?
If you're not getting any sound output from your Miccus Receiver, first ensure that the cables are correctly connected to the appropriate jacks. Also, verify that the music source is playing.
How to fix static or noise in the audio from Miccus Receiver?
If you're experiencing static or unwanted noise in the audio from your Miccus Receiver, try these steps: * Ensure you are using the AC adapter that came with the unit, as some PCs can introduce noise. * Move the Receiver away from amplifiers or powered speakers. * Check that the Receiver is connected to the correct line level input or output on your stereo receiver.
Why is the audio breaking up or wireless range too low on my Miccus Receiver?
If you're experiencing audio breakups or a low wireless range with your Miccus Receiver, make sure the antenna is securely attached and correctly positioned. Additionally, try moving the Receiver away from other 2.4GHz equipment like Wi-Fi routers and microwaves.
What to do if Miccus Home RTX Receiver does not turn on?
If your Miccus Receiver isn't turning on, check the USB power connection to ensure it's properly connected. Also, make sure you press and hold the power button for at least 3 seconds.
Attach the supplied antenna to the antenna terminal on the back of the RTX. Optimize performance by positioning it upright.
Choose the appropriate connector cable for your connection (TX or RX mode) before powering up. Connect to 'TX Audio In'/'Line In' or 'RX Audio Out'/'Line Out'.
Connect to USB power and hold the power button for 3 seconds to turn on/off.
General| Product color | Black |
|---|---|
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, AVRCP |
| Transmission distance | 45.7 m |
| Apple devices compatibility | iPad |
| Power source | Mains |
| Output voltage | 5 V |
| Cables included | RCA, USB |
Weight and Dimensions| Depth | 63.5 mm |
|---|---|
| Width | 109 mm |
| Height | 24 mm |
| Weight | 17 g |
To Next Page
