Miccus Home RTX - Detailed Instructions for Use; Power on;off

6
System requirements
Transmit Mode (TX): use the Home RTX with
any device capable of receiving a Bluetooth
®
wireless
audio signal (Bluetooth
®
proles refer to this feature
as A2DP). Such capable devices include Bluetooth
®
enabled headphones/speakers or adapters such as the
Miccus
®
Home RTX, Mini-jack AX4, or SR-71 Stealth
Headphones.
Receive Mode (RX): use the Home RTX with any
device capable of transmitting a Bluetooth
®
wireless
audio signal (Bluetooth
®
proles refer to this feature as
A2DP). Such capable devices include mobile phones,
tablets, and PCs or Bluetooth
®
audio adapters such as
the Miccus
®
Home RTX, the Miccus
®
Home RTX Mini,
or the Miccus
®
Mini-jack TX4.
Detailed Instructions for Use
Power on/off
The Miccus
®
Home RTX supports mini USB power.
Connect one end of the included USB power cable
to the Home RTX USB jack; connect the other end
to a compatible USB power supply unit
(5V/500mA), computer, or television USB port. Any
USB charger that is rated at an output of
5V@500mA or higher is compatible and may be
used with the Miccus
®
Home RTX.
The included USB cable with ferrite core is for USB
power only and does not offer an audio connection.