Miccus Home RTX - Receive (RX Mode): Pairing with a Bluetooth Transmitter; Factory Reset

9
Receive (RX mode): Pairing with a Bluetooth
®
transmitter
• Power on the RTX: press and hold the power
button (3 seconds) until the indicator light begins
ashing.
• Press and hold the RX button 3 seconds; the
indicator light will ash red and blue.
• Power on your A2DP Bluetooth
®
prole
transmitting device and engage pairing mode.
• When pairing is complete, the RTX indicator will
light a solid blue.
Note: For optimal connection, the Miccus
®
Home RTX
and your Bluetooth
®
device should be no more
than 1 meter (3ft) apart when pairing.
To begin streaming audio simply press the play button
on your audio source and adjust volume to taste. By
design the Home RTX is a passive transmitter or receiver
and has no volume control. User volume level must be
adjusted via the input and/or output sources
connected to the Miccus Home RTX.
Factory Reset
To r e s e t p a i r i n g m e m o r y, s i m p l y u n p l u g t h e Ho m e RT X
from USB power for 20 seconds. The Home RTX
remembers only one device pairing at a time, and once
it is disconnected from power it will clear the pairing
from memory