Miccus Home RTX - Power On;Off; Pairing; Use as a Transmitter (TX Mode); Use as a Receiver (RX Mode)

3
Out”. Some devices may require an additional
audio adapter or cable which is not included.
• Power on/off: Connect to USB power and hold
the power button (the front center button) for
3 seconds until the indicator light turns on and begins
blinking. To power off, hold the power button for
3 seconds until the indicator light turns off.
Pairing:
1. Use as a transmitter (TX Mode)
• Power on your headphones or other receiving
device and engage Bluetooth
®
pairing mode,
then place it near the Home RTX.
• Power on the Home RTX, press the RX
button once for 3 seconds, release, and then
double press the TX button.
• Allow up to 30 seconds, when pairing is
successful the RTX indicator light turns solid red.
2. Use as a receiver (RX Mode)
• Power on the Home RTX, then press and
release the RX button.
• Using your Smartphone or tablet
navigate to Bluetooth
®
devices and select
“Miccus Home RTX”.
• If prompted, use passkey “0000”, when pairing
is successful the RTX indicator light turns
solid blue.