2
Contents
Quick Start Guide 2
Pairing 3
About the Miccus
®
Mini-jack RTX 4
What’s in the Box? 5
System requirements 6
Detailed Instructions for Use 6
Connecting Audio Cables 7
Pairing the Home RTX with another device 8
Factory Reset 9
FAQ and Troubleshooting
10
Specifications
11
Support 11
Quick Start Guide:
• Attach the antenna: on the back of the RTX,
remove the red rubber connector cover and attach
the supplied antenna to the antenna terminal
(turn clockwise until snug). Optimize antenna
performance by positioning the antenna upright.
• Connecting the Home RTX: Before powering
up, choose the included connector cable that is
appropriate for your connection. When using as a
transmitter (TX mode) connect your audio cable to
the “TX Audio In” (RCA) or to the “Line In” (3.5mm).
When using as a receiver (RX mode) connect your
audio cable to the “RX Audio Out” or to the “Line
To Next Page
Loading...
