Miccus Home RTX - Transmit (TX Mode): Pairing with a Bluetooth Receiver

8
• In RX mode the Home RTX receives a wireless
stream of music/audio from a transmitting device
such as a Smartphone or tablet and connects to
your home stereo or speaker system for music
output. In RX mode the cable being used must be
connected to the appropriate output: either RCA
(red and white) to the “RX Audio Out” or 3.5mm
(mini-plug) to the “Line Out”. Use the included
cable that is best for your application.
Pairing the Home RTX with another
device
Transmit (TX mode): Pairing with a Bluetooth
®
receiver
• Power on your headphones, speaker or other
compatible A2DP Bluetooth
®
prole device and
engage pairing mode.
• Power on the Home RTX: press and hold the
power button (3 seconds) until the indicator light
begins ashing.
• Press and hold the RX button 3 seconds; the
indicator light will ash red and blue.
• Double press the TX button; red and blue ashing
will pause for a brief interruption then begin
blinking red and blue again.
• When pairing is complete the RTX indicator will
light a solid red.