Miccus Mini-jack RX - Charging; Turning the Mini-jack RX On;Off

4
Charging
1. Using the supplied USB cable, connect the small
end to the mini-USB input of the Mini-jack RX.
2. Connect the other end to the USB input
of your PC, laptop or USB power converter.
The mini-jack’s LED light will glow red during
charging.
3. When charging is nished, the red LED will
turn off. A full charge will provide up to 8
hours of play time.
Turning the Mini-jack RX On/Off
1. To turn on, press and hold the center button
for 3 seconds until the blue LED ashes.
2. To Turn off, press and hold the center button
for 5 seconds or until the red LED ashes.
3. USB power will also cause the Mini-jack
to turn on and look for the last connected
device. This is useful in automobile
applications where the Mini-jack RX comes
on when the car is started.
Note: For more information about using
Bluetooth® wireless please consult the User
guide of your phone or other