5
Pairing the Mini-jack RX
1. To enter pairing mode, press and hold the
on/off button for 8 seconds or until both
red and blue LEDs ash.
2. Search for the Miccus® Mini-jack RX on
your mobile phone or compatible transmitter.
To complete pairing some devices require a
pass key or code, use “0000.”
3. The devices should now recognize each other
and pair. The LED on the Mini-jack RX will
slowly ash blue after successful pairing.
4. Once successfully paired, the devices can
be powered off. To re-connect simply power
them both on, no need to pair again.
Note: If you wish to use the Miccus® Mini-jack
RX with another phone you must
restart the pairing process with the new device.
Playing Music
1. Using the supplied audio cables and adaptors,
connect the Mini-jack RX to the auxiliary
(AUX) input of your home or car stereo.
2. Make sure the transmitter (Miccus® mini-
jack TX, mobile phone, or compatible
source) is turned on and paired with the
Mini-jack RX and that the devices are no
more than 33’ (10m) apart.
To Next Page
Loading...
