Miccus Mini-jack RX - Visual Indicators

6
3. The blue LED on the Mini-jack RX will ash
slowly, indicating a connection.
4. Press “play” and the music will be sent
wirelessly to the Miccus® Mini-jack RX.
Note: If you cannot hear the music,
Make sure your stereo system is set to AUX
input or whichever input is the corresponding
input to the Mini-jack RX.
a. Check and make sure the volume is not
turned down or muted.
Visual Indicators
State of the device State of the LED
Pairing mode
The red and blue
LED ash alterna-
tively
Connected and
playing
The blue LED
ashes once every
3 seconds
Sleep mode
The blue LED
ashes once every
5 seconds
Charging Solid red
Charging and con-
nected
Solid red with slow
ashing blue