Michele Watch - Chronograph Models (ISA 8172;220); Setting Time and Date

14
Chronograph
• Theminutecountermeasures30minutesperrotation.
• Thecenterstop-secondmeasures60secondsperrotation.
PLEASE NOTE:
Before using the chronograph functions, please ensure that:
- The crown is in position I (= normal position)
- The two chronograph hands are precisely at zero position following activation of
pusher B. Should this not be the case, the positions of the hands must be adjusted.
(see chapter entitled “Adjusting the chronograph hands to zero”).
Chronograph: Basic Function
(Start / Stop / Reset)
1. Press pusher A to start the center stop-second hand.
2. To stop the timing, press pusher A again.
3. To reset the 2 chronograph hands to zero positioning, press pusher B.
III III
S
U
N
M
O
N
T
U
E
W
E
D
T
H
U
F
R
I
S
A
T
Crown
(Position I, II, III)
Pusher A
Pusher B
Center Stop-second
Minutes Counter
Seconds Counter
Weekday