Michele Watch - Chronograph Basic Function

10
Chronograph: Intermediate or Interval Timing
1. Press pusher A to start the center stop-second hand.
2. Press pusher B to stop the chronograph.
*NOTE: Although the chronograph hands have stopped, the movement continues
to record the current timing.
3. Make up the measured time:
Press pusher B again and the 3 chronograph hands are quickly advanced to the
ongoing measured time. To continue to record intervals, continue to push pusher B.
4. Press pusher A to stop and the final time is displayed.
5. To reset the three chronograph hands to zero positioning, press pusher B.
Adjusting the Chronograph Hand to Zero
1. Pull crown out to position II (all 3 hands are in their correct or incorrect position).
2. Press pusher B to single step the minute counter hand. Press and hold pusher B to
advance the minute counter hand quickly.
3. Pull crown out to position III.
4. Press pusher A to single step the center stop-second hand. Press and hold pusher
A to advance the center stop-second hand quickly.
5. PresspusherBtosinglestepthe 1/10 second hand. Pressand hold pusher B to
advancethe1/10secondhandquickly.
6. Return the crown to position I.