Michele Watch - Chronograph Models (ETA G10, G15); Setting Time and Date

9
Chronograph
• Theminutecountermeasures30minutesperrotation.
• Thecenterstop-secondmeasures60secondsperrotation.
PLEASE NOTE:
Before using the chronograph functions, please ensure that:
- the crown is in position I (= normal position).
- the three chronograph hands are precisely at zero position following activation of
pusher B. Should this not be the case, the positions of the hands must be adjusted
(see chapter entitled “Adjusting the chronograph hands to zero”).
Chronograph: Basic Function
(Start / Stop / Reset)
1. Press pusher A to start the center stop-second hand.
2. To stop the timing, press pusher A again.
3. To reset the three chronograph hands to zero positioning, press pusher B.
1/10 Second Counter
Pusher A
Crown
(Position I, II, III)
Pusher B
III III
Minutes Counter
Center Stop-second