Michele Watch - Split-time Timing Function

8
CHRONOGRAPH MODELS (ETA G10, G15)
Setting the Time
1. Pull crown out to position III (the watch stops).
2. Turn crown until you reach correct time.
3. Push crown back into position I.
Setting the Date
1. Pull crown out to position II (the watch continues to run).
2. Turn crown until yesterday’s date appears.
3. Pull crown out to position III (the watch stops).
4. Turn crown until correct date appears.
5. Continue to turn crown until correct time appears.
6. Push crown back into position I.
Minute Hand
Hour Hand
Second Hand
Pusher A
Crown
(Position I, II, III)
Pusher B
Date Indicator
III III