EasyTouch RV
13
©2023 Micro-Air LLC Revision 1.2
FAQs – Frequently Asked Questions
Thermostat Operation
How do I adjust the screen brightness?
The screen brightness will change from Active to Sleep brightness after about 30 seconds of inactivity.
How do I turn off the backlight so that the screen is completely dark?
The screen brightness will change from Active brightness to Off after about 30 seconds of inactivity.
My inside temperature does not seem to be accurate. What is going on?
Systems may use the Internal sensor of EasyTouch to make decisions or they may use a Remote sensor
connected at the back of the thermostat or at the A/C control board. If both an internal sensor and remote
sensor are available, the remote sensor will always take priority.
Navigate to the info-screen to check what sensor the ambient temperature is coming from.
If the sensor is REMOTE then there may be an issue with its mounting, location, or general failure. INTERNAL
sensors can be calibrated, as well as EasyTouch RV model 352 and 356 REMOTE sensors.
EasyTouch RV 357 is unique so please reference it in the EasyTouch RV Reference Manuals.
There is text at the top-center of the main screen. What does it mean?
These are active faults (red) or status (orange/yellow) messages about the system. Some appliances or
thermostat operation may not work if there is a fault. Please check the EasyTouch RV Reference Manuals for
your Model to see more information about these messages.
To Next Page
Loading...
