EasyTouch RV
5
©2023 Micro-Air LLC Revision 1.2
Fan Operation (Electric)
• Full Auto: Turns the electric fan on and off with a cycle. It automatically adjusts the speed based on
the difference between setpoint and inside temperature
• Cycled: Turns the electric fan on and off with a cycle at the selected speed only
• Manual: Always runs the electric fan at the selected speed
NOTE: If there is no button then there is no electric fan control for the selected . Not all
fan speed control options are available for all modes. There is no direct control of the furnace blower.
Auxiliary heating systems are self-contained and fully control their sequence of operations.
Change Zone Actively Displayed
For multi-zone thermostats, the operations viewed and selected on the main screen apply only to this zone.
Turn a Zone’s Operation Off and Leave Other Zones On
First, choose the zone you want to make changes to (see Change Zone Actively Display).
Check Local Weather
Tap this area of the screen for more information, even if there are no graphics shown.
Set Time and Location
Location must be saved in the thermostat to know the time zone. This is saved by connecting to the thermostat
with the app over Bluetooth while the app has location services permissions granted. See section Control
Thermostat over Bluetooth (Local Access) for details. No special operations, just simply connect. Current time
is also given simultaneously. If the thermostat loses power or resets, location is preserved but time is lost. It
can get the time again automatically when the thermostat reconnects to the internet, without app interaction,
or on a subsequent Bluetooth connection. See section Connect Thermostat to Wi-Fi for details.
To Next Page
Loading...
