EasyTouch RV
3
©2023 Micro-Air LLC Revision 1.2
Introduction
This document is meant to be a quick reference to know what buttons to press to perform desired operations.
The intent is to perform these operations with the thermostat in front of you. These operations in further detail
can be found in the specific EasyTouch RV Reference Manuals for your EasyTouch RV model.
EasyTouch RV Models and Compatible Replacements
EasyTouch RV is designed to be a direct replacement thermostat for many existing A/C systems. There are
a few models of EasyTouch RV to replace thermostats across many manufacturers and models. Please use
our EasyTouch RV Model Selector and the EasyTouch RV Reference Manuals to determine if we have a
compatible replacement for you. If you are still not sure after using those resources then you can Contact Us.
Installing the Thermostat
The installation of EasyTouch RV will be specific to the model you purchased. Please use the in-box Quick-
Start guide or the EasyTouch RV Reference Manuals for your specific thermostat to install it. Some thermostats
are more involved than others so please be sure the thermostat is wired correctly, and any needed software
configuration is completed appropriately. Otherwise, the thermostat may not operate correctly, and basic
functions listed here may not work.
Common Thermostat Operations
Please use the Introduction section to first make sure your EasyTouch RV model is correct, installed, and
configured appropriately. Thermostat operation may not work as intended or as follows if not.
The operations in this section start from the main screen of the thermostat touch screen, shown in Figure 1.
Figure 1 - Main Thermostat Screen
To Next Page
Loading...
