Need help?Do you have a question about the MICRO-AIR EasyTouch and is the answer not in the manual?
Lists standard features of the EasyTouch controller.
Lists optional features and sensors available for the EasyTouch controller.
Lists compatible FX1 and FX2 control boards.
Guidance on selecting an optimal location for accurate room temperature sensing.
Instructions for physically mounting the EasyTouch display panel.
How to install the optional remote air sensor for accurate room temperature sensing.
Instructions for installing the optional sensor to monitor outside cabin temperature.
Installing the optional condenser coil temperature sensor for DX systems.
Installing the sensor for chilled-water air handlers.
Installing the optional sensor for humidity control on FX2 systems.
Explains reversing valve function in Cool/Heat modes for DX systems.
Describes water valve operation for chilled-water systems.
Details the controls and display elements on the EasyTouch home screen.
Explains the indicators and buttons on the EasyTouch main screen.
Describes the different operating modes: OFF, ON, AUTO, COOL, HEAT, MOISTURE.
Details Automatic, Manual, and Fan-Only modes for fan speed control.
Describes the SENSOR FAULT and its immediate lockout condition.
Explains the HIGH PRES FAULT and its contribution to lockout.
Explains the PUMP SENTRY FAULT and its lockout contribution.
Overview of the main menu structure and navigation.
Explains the structure and interaction of settings screens.
Accessing and overview of the General Settings menu.
Adjusting high, medium, and low fan speed settings.
Calibrating temperature sensor and setting display units.
Configuring electric heat and fan motor type settings.
Setting and resetting air filter replacement reminders.
Adjusting temperature set points and humidity mode limits.
Configuring auto fan speed differentials and system mode selection.
Selecting inside temp sensor and fan operational mode.
Enabling or disabling separate cooling and heating set points.
Configuring compressor start delays and failsafe response levels.
Settings for monitoring voltage and managing de-icing.
Settings for pump protection and low pressure switch detection.
Detailed explanation of the low voltage monitor feature.
Configuration options for the de-icing cycle based on sensor type.
Setting pump operate mode to cycled or continuous.
Forcing the water valve open for air bleeding.
Setting temperature differential for water valve operation.
Saving current parameter settings for later recall.
Recalling previously saved parameter settings.
Restoring all settings to factory defaults.
Enabling/disabling the scheduler and understanding its status.
Setting up programs for specific days or groups of days.
Controlling the visibility of date and time on the main screen.
Selecting the desired format for date and time display.
Adjusting the current date and time settings.
Viewing the current firmware version and release date.
Adjusting display brightness and color schemes.
Configuring display behavior when entering Sleep Mode.
Setting up PIN access to restrict display functions.
Viewing live readings from sensors and system outputs.
Accessing fault help descriptions and online resources.
Step-by-step instructions for verifying system operation.
Displaying a log of all faults that have occurred.
Showing the total operating hours for the compressor.
Showing the total operating hours for the fan.
General| Brand | MICRO-AIR |
|---|---|
| Model | EasyTouch |
| Category | Temperature Controller |
| Language | English |
To Next Page
