MICRO-AIR RP4 - Dust Collector Lef Bracing Installation Procedure

11
RP DUST COLLECTOR
DUST COLLECTOR LEG BRACING INSTALLATION PROCEDURE
This Kit Includes:
15 ea. P222 5/16” Hex Nuts
15 ea. P2614 5/16” Hex Bolts
30 ea. P3615 5/16” Flat Washers
30 ea. P249 5/16” Lock Washers
2 ea. 38394-01 Short Leg Cross Brace
4 ea. 38394-02 Long Leg Cross Brace
INSTALLATION:
1. Straighten and plumb each individual leg.
2. Bolt each end of the cross braces to the legs.
3. Tighten all bolts until secure.
FIGURE 8