result in an increased level of emissions or decreased level of immunity,
in relation to the other device’s EMC.
List of EMC important cables. Do not exchange by other types
USB Lead (MicroLab to PC)
Power line US to mains adapter
The MicroLab has an essential performance – the product should
continue to operate correctly. In the unlikely event of a Fast Transient /
ESD event occurring, the device should be reset and located away from
the source of interference.
WARNING: The MicroLab should not be used adjacent to or stacked
with other equipment. If adjacent or stacked use with other equipment is
necessary, the MicroLab and the other equipment should be
observed/monitored, to verify normal operation in the configuration in
which it will be used.
To Next Page
Loading...
Need help?
General