Micro Innovations Windows CE - Command Line Call

Windows CE Programs
M000174-19 71
7.13.1 COMMAND LINE CALL
The
Command line call is described in chapter 4.1. All parameters can be used as required, although
only the settings of the used parameters can be changed. The following parameters are supported:
Parameter Description
-source <path> Source path for the copy command (Source:)
-dest <path> Destination path for the copy command (Destination:)
-del Deletes the destination path directories before starting copying
-GrsRuntime Selects check box <GRS Runtime>
-GrsProject Selects check box <GRS Project>
-GrsRecipe Selects check box <GRS Recipe>
-GrsPassword Selects check box <GRS Password Setting>
-PlcRuntime Selects check box <PLC Runtime>
-PlcProject Selects check box <PLC Project>
-OS Selects check box <OS>
-Autoexec Selects check box <Autoexec>
-fullscreen The application is started in full screen mode.
-? or –h Display of the possible parameters
The example shows how a command line call can look like:
CFBackup.exe –source \StorageCard –dest \InternalStorage –GrsRuntime –GrsProject –Autoexec