Micro Innovations Windows CE - Page 9

Windows CE General
M000174-19 9
Example of an «Autoexec.bat» file:
ECHO OFF
REM ************************************************
REM Verify boot device, if parameter is not
REM available, the boot device is StorageCard
SET bootdev=StorageCard
IF "%1"=="" GOTO START
SET bootdev=%1
REM ************************************************
:START
REM
START Shortcut –p GRSW3.EXE
START CeRemoteSvr.exe -h
START GRSW3.EXE
ECHO ON
This example initially checks whether the pass parameter (%1) is set for the boot device. If not,
StorageCard is defined the boot device. A link file for the GALILEO runtime system is then created on
the desktop, the «Remote Server» application is then started and finally the GALILEO runtime.
See also
Shortcuts.