Folding mechanism maintenance
A folding scooter always has a certain amount of play. This will become greater
over time due to the usual load. To ensure that you enjoy your scooter for the
longest time possible, we will show you how to practically remove the play of your
folding mechanism in a few simple steps:
● Open the quick clamp lever and spray a little lubricant on the sliding surface of
the quick clamp lever.
● Re-tighten the set screw on the opposite side of the folding mechanism.
Tighten this set screw until it is possible to close the quick clamp lever with
pressure up to the end stop.
Image:
Lubricant on sliding surfaces
of the quick clamp lever
Image:
Tighten the set screw
32
To Next Page
Loading...
