Micro Emicro one X2 - Front Wheel Maintenance; Maintenance of Screws: Torque

33
Front wheel brake maintenance
Maintenance of screws: Torque
It is imperative that you regularly re-adjust the cable tension of the front wheel
brake to allow for precise brake manoeuvres. You can adjust the cable tension via
the set screw on the brake itself. Adapt the set screw for sucient braking.
Some screws on the footboard of your electric scooter require a specic
tightening torque of 24NM. When tightening these screws, please ensure make
sure a torque spanner is used with the specic tightening torque.
Image:
Setup of the set screw on the brake lever
Image:
Screws that need to be tightened with 24NM
torque.
EN