EasyManua.ls Logo

MicroAire LipoTower - RETURN PROCEDURE; WARRANTY; EXTENDED WARRANTY;SERVICE AGREEMENT; DISPOSAL

MicroAire LipoTower
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IM-LIPOTOWER Rev G14
RETURN PROCEDURE
The MicroAire LipoTower System is eld-repairable only, and should not be returned to the factory.
WARRANTY
MicroAire Surgical Instruments warrants its LipoTower System to be free from defects in material and workmanship
in their manufacture for a period of one year from the original purchase date by the end customer. The warranty is
limited to the repair or replacement of the product without charge.
This warranty is void in the event of abuse, misuse, or use in other than normal surgical environments, or in the
event of disassembly, alteration, or repair of the product not authorized by the manufacturer, or in the event that the
product has not been used in a reasonable manner and in compliance with the written instructions furnished by the
manufacturer.
All other expressed or implied warranties of tness and merchantability are excluded here from, and the manufacturer
shall have no liability of any kind for incidental or consequential damages.
EXTENDED WARRANTY/SERVICE AGREEMENT
Extended warranties and service agreements are available on MicroAire power equipment. Extended warranties may
be purchased while the equipment is covered by the original warranty. If the equipment is out of warranty, it must rst
be restored, if necessary, to full serviceable condition before being eligible for a service agreement.
DISPOSAL
Follow local regulations for proper disposal.
IEC 60601-1-2 COMPLIANCE SUMMARY
CAUTION: The MicroAire LipoTower system needs to be installed and put into service according to the EMC
information provided in this Instructions for Use manual. Portable and mobile RF communications equipment can
aect medical electrical equipment. The MicroAire LipoTower System may be interfered with by other equipment with
CISPR emission requirements.
CAUTION: The pin of the BNC connector of the MicroAire LipoTower System should not be touched and connection to
this port should not be made unless ESD precautionary procedures are used.
CAUTION: Electrostatic Discharge (ESD) can damage electronic equipment. Under certain conditions, ESD may build
up on your body or an object and then discharge into another object. To prevent ESD damage, you should discharge
static electricity from your body before interacting with the MicroAire LipoTower System. You can protect against
static-electricity discharge from your body by touching a metal grounded object before you interact with anything
electronic. It is recommended that all sta involved with this device receive an explanation of the ESD warning
symbol and training in ESD precautionary procedures.
CAUTION: The use of accessories and cables other than those specied in the Accessories list of this Instructions for
Use manual may result in increased emissions or decreased immunity of the equipment or system.
CAUTION: The MicroAire LipoTower system should not be used adjacent to or stacked with other equipment and that
if adjacent or stacked use is necessary, the equipment or system must be observed to verify normal operation in the
conguration in which it will be used.

Related product manuals