MicroCool IBEX Series - Page 18

IBEX 8 Nozzle SMALL FRAME_June 2020 June 20 Page 18 of 41
One Shot Run
• Pump is running in “Auto” mode.
• One shot timer is active and counting
down.
• System pressure.
• Hours of operation
Control Parameters
• Current temperature
• Temperature set point
• Current humidity
• Humidity set point
*Only active when temp and humid soft key
is set to ON in “parameter set”
(only available with optional upgrade)
Auto Run Control Parameters
• Pump is running in AUTO
• System pressure
• Current humidity
• Current temperature
*Only active once temp and humid soft key is
set to ON in “parameter set”
(only available with optional upgrade)
Prime/Flush
• Pump system is in Prime or Flush
sequence
• Prime/Flush Time
• Elapsed Time
Auto Clock Run
• Pump is running “RUN” in auto time
clock
• System pressure
• Hours of operation