EasyManuals Logo

Microlife 200 Series User Manual

Microlife 200 Series
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Performance of this pulse oximeter may be degraded if used outside of its
specified operation temperature and humidity rating, or if stored outside of its
specified storage temperature and humidity rating. Avoid storage in direct sunlight.
Performance of this pulse oximeter may be degraded if the device is exposed to
mechanical shock.
Performance of this pulse oximeter may be degraded if the sensor lens is dirty or
damaged; ensure the sensor lens is clean before using.
DO NOT:
Use this device if you think it is damaged or anything appears unusual (e.g.
sporadic operation, open packaging upon purchase).
Dispose of the battery or device in fire; the battery may explode.
Use a metal tool to replace the battery; doing so may short circuit the terminals.
Attempt to recharge the battery as they are not rechargeable.
Open/modify this device; inaccuracy and/or harmful injury may result
Service the device when being used or when power is supplied (other than
changing batteries). No other parts/components are accessible.
CAUTION – Potentially hazardous situation that if not avoided may
result in minor/moderate injury, property damage, and/or damage to the
device
This device contains sensitive electronics components. Avoid strong electrical or
electromagnetic fields in the direct vicinity of the device (e.g., mobile telephones,
microwave ovens). These can lead to temporary impairment of the measuring
accuracy. Keep the device a minimum of 3.3 m from such devices when using or
move the device to another location if interference is determined.
When not using the pulse oximeter for extended lengths of time, remove the
batteries to avoid potential battery leakage and damage to the monitor.
Only open the pulse oximeter battery cover to replace the battery. When replacing
the batteries, ensure all the batteries are replaced simultaneously to avoid battery
damage and potential damage to the monitor. Microlife USA does not recommend
using rechargeable batteries.
Batteries and electronic instruments must be disposed of in accordance with the
locally applicable regulations as domestic waste.
DO NOT:
Use this device any longer than ½ hour at any given location on the body.
Drop this device or expose it to strong vibrations; sensitive components may be
affected resulting in inaccuracies and/or operational issues.
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Microlife 200 Series and is the answer not in the manual?

Microlife 200 Series Specifications

General IconGeneral
Measurement MethodOscillometric
Device TypeBlood Pressure Monitor
Accuracy+/- 3 mmHg (blood pressure), +/- 5 % of reading (pulse)
Power Source4 x AA batteries
Operating Temperature10°C to 40°C
Operating Humidity15% to 85% RH
Storage Temperature-20°C to 60°C

Related product manuals