4
The pulse display is not suitable for checking the frequency
of heart pacemakers!
If you are pregnant, you should monitor your blood pressure
regularly as it can change drastically during this time.
How do I evaluate my blood pressure
Table for classifying blood pressure values in adults in accordance
with the World Health Organisation (WHO) in 2003. Data in mmHg.
The higher value is the one that determines the evaluation. Example:
a blood pressure value of 140/80 mmHg or a value of 130/90 mmHg
indicates «blood pressure too high».
2. Using the device for the first time
Selecting standard or MAM mode
This device enables you to select either standard (standard single
measurement) or MAM mode (automatic triple measurement). To
select standard mode, press the MAM button 3 for 3 seconds while
the device is switched off until «ON» starts flashing. Press the ON/
OFF button 1 to switch from «ON» to «OFF». The device is now set
to standard mode (single measurement). The device then automati-
cally turns off. To select MAM mode, repeat the sequence above
until «ON» and the MAM symbol appears in the display. The MAM
A number of factors can affect the accuracy of
measurements taken on the wrist. In some cases, the
result may differ from the measurement taken on the upper
arm. We therefore advise you to compare these values with
those produced by the upper arm measurement and
discuss them with your doctor.
Range Systolic Diastolic Recommendation
1. blood pressure
normal
< 120 < 80 Self-check
2. blood pressure
normal
120 - 129 80 - 84 Self-check
3. blood pressure
slightly high
130 - 139 85 - 89 Consult your doctor
4. blood pressure
too high
140 - 159 90 - 99 Seek medical
advice
5. blood pressure far
too high
160 - 179 100 - 109 Seek medical
advice
6. blood pressure
dangerously high
≥180 ≥110 Urgently seek
medical advice!
Range Systolic Diastolic Recommendation
To Next Page
Loading...
Need help?
General
