3.
How do I get started?
3.1.
Screen film
There is a protective piece of static film covering the
monitor’s screen. Please remove it before use.
3.2.
Inserting the batteries
After you have unpacked your device, insert the batter-
ies. The battery compartment is located on the back of
the device.
a)
Remove the battery cover.
b)
Insert the batteries (4 x size AAA 1.5 V), observ-
ing the indicated polarity.
c)
If a battery warning appears in the display, the
batteries are discharged and must be replaced.
Attention!
•
After the low battery indicator appears, the
device won’t function until the batteries have
been replaced.
•
Please use AAA 1.5 V batteries and replace them
all at the same time.
•
If the blood pressure monitor is not used for long
periods, remove the batteries from the device.
3.3.
Power switch / screen lock
To activate your monitor, push the switch on
the right hand side of the monitor to the
unlocked position.
To Next Page
Loading...
