FlowPrep 060 Ordering Information
May 2010 5-1
5. Ordering Information
The FlowPrep 060 System components and accessories can be ordered using one of the fol-
lowing methods:
• Call our Customer Service Department at (770) 662-3636
• Access our web site at www.micromeritics.com
• Contact your local sales representative
When ordering, please use the information provided below to place your order
Table 5-1. FlowPrep Components and Accessories
Part Number Item and Description
236-33005-00 PrepSeal Kit, used to degas and transfer air-sensitive samples to an
analysis port without contamination.
061-33001-00 Flow Control Valve Kit; allows you to regulate the flow rate to the
sample tube
060-25809-00 Gas Delivery Tube, stainless steel, set of 6
060-25804-00 Flexible Tubing, internal (valve inlet), set of 6
060-25805-00 Flexible Tubing, external, set of 6
003-51147-00 Slow-Blow Fuse, 2.5 A, 100-200 VAC
003-51148-00 Slow-Blow Fuse, 1.25 A, 220-240 VAC
003-51197-00 Slow-Blow Fuse, 1.25 A, 220-240 VAC (Type T, time lag)
230-02001-00 Gas inlet line, 1/8 in. x 6 ft. long, copper
004-32004-00 Sample Tube Stopper, rubber
004-62230-58 Gas Regulator, for use with helium or nitrogen, 30 psig
004-25549-00 Reducer Fitting, 1/4-in. for 1/8-in. copper tubing
065-25815-00 Heating Station Adapter, TriStar and ASAP Series analyzers
065-25811-00 Heating Station Adapter, Gemini bulb sample tube, 3/4 in
065-25812-00 Heating Station Adapter, Gemini straight-wall sample tube, 3/8 in.
003-22006-01 Temperature Controller
060-42803-00 Operator’s Manual
To Next Page
Loading...