FlowPrep 060 Description
May 2010 1-1
1. GENERAL INFORMATION
Description
The FlowPrep 060 Degasser prepares samples for adsorption analysis. It uses flowing gas
passed over a heated sample to remove moisture and other contaminants. The degasser has six
heating stations for degassing samples and six cooling stations. The desired degassing temper-
ature is easily set on the temperature controller pad located on the front of the instrument. Gas
flow control valves are readily accessible and provide a constant indication of the valve state.
Figure 1-1. FlowPrep 060 Degasser
To Next Page
Loading...