Microplex SOLID F40 - Page 136

136 Troubleshooting
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s Manual SOLID F40 Edition 1.1
6. Detach the fanfold paper within the feeding unit at the
perforation and open the paper retaining levers to
remove the jammed paper.
Pull the paper out of the device only in the transport
direction.
Paper retaining levers
7. Detach the fanfold paper in the exit unit section at its
perforation. Remove the jammed paper by pulling
it out. Pull the paper out of the device only in the
transport direction.