Selection Tool Operation 8
Copyright © 2011-2017 MicroRidge Systems, Inc.
MobileCollect Selection Tool
5.1.1
Cables & Mobile Modules
This tab is the starting point for using the MobileCollect Selection Tool. You will need to know
the list of gage manufactures and gage models that you want to use with MobileCollect. If you
are connecting Mitutoyo gages, use the gage code rather than the gage model.
If you are using a gage that is supported by the Mini and/or Digital Mobile Module, you must
specify the type of Mobile Module you want to use. There are a set of check boxes in the upper
right-hand corner of this tab that allows you to specify what cables will be displayed in the cable
search grid. The selection grid will not simultaneously display the cable part numbers for both
the Mini and digital Mobile Modules.
To Next Page
Loading...