Microsoft HoloLens User Manual

3. Along the left sidebar, select ‘For developers’. Then turn the toggle switch on for both
‘Developer mode’ and ‘Device portal’. Restart the device after enabling these options.
Tethering HoloLens to a Computer
1. After ensuring that the computer and HoloLens are on the same network, enter the IP
address of the HoloLens into an internet browser:
a. Alternatively, a user can tether the device to a computer via USB and connect via
IP at http://127.0.0.1:10080/. This is recommended for large application files
and/or slow WiFi connections.
2. Enter the device’s login credentials to access the device. To change the username and
password of your HoloLens device, refer to the Reset Username / Password section.

Microsoft HoloLens Specifications

General

Product Type	Augmented reality headset
Refresh Rate	60 Hz
Battery Life	2-3 hours of active use
Weight	579 grams
Display Technology	See-through holographic lenses
Resolution	2.3M total light points
Audio	Spatial sound
Connectivity	Wi-Fi 802.11ac, Bluetooth 5.0
Operating System	Windows Holographic
Sensors	Ambient light sensor
Storage	64GB flash storage