Advanced Settings Adjustment
Sleep Settings
The power settings determine how much idle time can pass before the device will automatically
power down. These settings are customizable on each device and if the device is running on
battery or plugged in.
The settings menu is found on the bottom of the home-screen. The device should reflect a
change to a new setting immediately. Refresh the page to double-check that the setting has
taken hold.
Reset Username / Password
This process will reset the username and password of the HoloLens device itself. These are the
credentials used to access the device from the Web Interface.
1. Click on the ‘Security’ button on the top bar of the Web Interface.
2. Click ‘Request PIN’ under the ‘Credentials Reset’ heading. Put on the HoloLens device
and jot down the PIN that it displays.
To Next Page
Loading...
