14 M1171431
3. Separate C-cover from device – Using a plastic opening tool, slowly pry C-cover upwards to unsnap the
hook and snap features.
a. Disassemble hooks from the front of the device rst by prying upwards with the plastic tool.
b. Pry up on the hooks on the left and right sides of the device, working from the front of the device to
the back.
c. Open the device to its maximum angle and tilt it backwards. Press the C-cover towards the display
as shown to unsnap the remaining hooks.
P
U
S
H
To Next Page
Loading...
