If You attempt to defeat or circumvent any Xbox 360 E, Kinect
Sensor, or Accessory technical limitation, security, or anti-piracy
system, You may cause Your Xbox 360 E, Kinect Sensor, or
Accessory to stop working permanently. You may also void
Your Express Warranty and Implied Warranty, and make Your
Xbox 360 E, Kinect Sensor, or Accessory ineligible for authorised
repair, even for a fee.
This warranty is valid only in Hong Kong, Korea, Singapore
and Taiwan. This warranty will be subject to and construed in
accordance with the law of your country of residence.
For Hong Kong and Singapore Only – in the case of any conict
or inconsistency between the Chinese and English versions of this
warranty, the English version shall prevail.
For home or ofce use.
Not intended for use in machinery, medical or industrial applications.
Any changes or modications not expressly approved by Microsoft
could void the user’s authority to operate this device.
This product is for use with NRTL Listed (UL, CSA, ETL, etc.), and/
or IEC/EN 60950-1 compliant (CE marked) Information Technology
equipment.
No serviceable parts included.
This device is rated as a commercial product for operation at +41ºF
(+5ºC) to +95ºF (+35ºC).
To comply with RF exposure requirements, the following operating
congurations must be satised: the antenna has been installed
by the manufacturer and no changes can be made. The wireless
devices must not be collocated or operating in conjunction with
any other antenna or transmitter. Except for headset and handheld
devices, wireless devices must be at least 20 cm between the
antenna of the wireless device and all persons.
This product is restricted to indoor use only to reduce any potential
for harmful interference with licenced operation in the 5.15 to
5.25 GHz frequency range.
Without permission granted, any company, enterprise, or user is
not allowed to change frequency, enhance transmitting power, or
alter original characteristic or performance to approved low power
radio-frequency devices.
The low power radio-frequency devices shall not inuence aircraft
security and interfere with legal communications. If found, the user
shall cease operating immediately until no interference is achieved.
The said legal communications mean radio communications are
operated in compliance with the Telecommunications Act.
The low power radio-frequency devices must endure the
interference from legal communications or ISM radio wave
radiated devices.
Product name: Xbox 360 E Console and Kinect Sensor
Model no.: 1538 (Xbox 360 E Console) and 1414 or 1473
(Kinect Sensor)
Designated voltage: 100-127 VAC to Power Supply
Designated hertz: 47-63 Hz
Total consumption of electric power or designated input of electric
current: 9.6 A at 12 VDC and 1 A at 5 VDC from Power Supply
Manufacture year: 2013
Manufacture number: 1538 (console), 1414 or 1473 (sensor)
Country of origin: China
Manufacturer name: Microsoft Corporation
Importer name: Synnex Technology International
Importer’s Address: 4th Fl. 75, Section 3, Min-Sheng E. Rd.,
Taipei 104
Importer’s number: (02) 2506-3320
Quantity: One
Product name and manufacture number: Please see Product
Information
Warranty Content, Term, and Commencement Date: Please see the
Warranty in this manual.
Manufacturer name and address: Microsoft Corporation,
One Microsoft Way, Redmond, WA 98052-6399 USA
Retailer name and address: Please see invoice or receipt upon
purchase of this product.
Purchase date: Please see invoice or receipt upon purchase of this
product.
Complies with
IDA Standards
DB100398
Complies with
DBA Standards
DB102868
Waste batteries, please recycle.
Use of controls or adjustments, or performance of procedures
other than those specied herein may result in hazardous
radiation exposure.
This device complies with International Standard IEC 60825-
1:1993+A1+A2 (IEC 60825- 1:2001-08) for a Class 1 laser product.
This device also complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
The following Class 1 laser label is located on the foot of the sensor.
This symbol on the product or its batteries or its
packaging means that this product and any batteries it
contains must not be disposed of with your household
waste. Instead, it is your responsibility to hand this over to
an applicable collection point for the recycling of
batteries and electrical and electronic equipment. This separate
collection and recycling will help to conserve natural resources and
prevent potential negative consequences for human health and the
environment due to the possible presence of hazardous substances
in batteries and electrical and electronic equipment, which could
be caused by inappropriate disposal. For more information about
where to drop off your batteries and electrical and electronic waste,
please contact your local city/municipality ofce, your household
waste disposal service, or the shop where you purchased this
x188018903MNL.indd 5 3/13/13 5:42 PM
To Next Page
Loading...
Need help?
General
