L: initial adjustment speed when auto cutting, 1~20
P: up/down speed in manual mode, 20~80
d: auto adjustment speed ratio (the bigger the value is, more slowly the speed adjusts)
Indicator lights
Up: move up
Down: move down
Auto: in the auto mode. When the light off, in the manual mode
Upper limit
Lower limit
Arc voltage: there is arc voltage signal input
2-4 error alarm
EE01: cancel auto, press the sensitivity button to cancel the error
EE02: it fails to save settings and power off THC and power on again.
To Previous Page
Loading...
Need help?
General