15
lected skin area and wait for
a minute to let the skin dry.
Change your sensor sites
regularly to avoid discomfort
or skin irritation.
• Open the sensor package.
Ensure the sensor is not expired by checking its
expiration date. If the sensor is expired or the steril-
ized package is damaged, please do not use it.
Note
• Take out the sensor appli-
cator by turning it anti-clock
wise.
• Place the applicator on the
top of the desired sensor
site. Press it firmly against
skin and press the button
to launch the sensor. After
inserting the sensor, wait
a few seconds to allow the
Release button
To Next Page
Loading...
