30
Removing a sensor
Remove the old sensor when the PDA indicates that
the sensor has expired or if you feel any site irritation
or discomfort.
• Carefully pull the tape that holds the sensor to the
skin from the edge and slowly uncover it until the
entire sensor is removed. You can use warm soapy
water to remove any remaining sticky residue.
• Press the two locking arms on one side of the sensor
base, pull the transmitter away from the sensor base,
and then remove the transmitter so that it can be
used again.
• The sensor is meant for one-
time use only. Dispose the
used sensor according to
your local regulations.
To Next Page
Loading...
