Microtech AiDEX - Date and Time Configuration

29
• The blood glucose test interface will appear any time
you insert a blood glucose test strip, even when the
PDA is in stand-by mode and /or in another menu
screen.
• It is strongly recommended to calibrate the sensor as
soon as possible after it is initialized to conrm the
sensor’s performance.
• If you doubt that the glucose level displayed by the
CGMS is correct, you can use the calibration function
to conrm the performance. However, do not abuse
the calibration. i.e. No more than once every 6 hours.
Important
Do not calibrate more than once every 6 hours.