23
• When the transmitter loses the connection with the
sensor and reconnects, the PDA will ask you to con-
rm. Please press “Cancel” if you already completed
the initializing process. The PDA will skip initialization
and starts displaying your current blood glucose val-
ue immediately. If you press “Conrm”, the sensor
will start initializing again.
• At this point, the PDA
skips initialization and
starts displaying the
current blood sugar
value directly.
Note
Do not cancel the
initialization process
when using a new
sensor. Skipping new
sensor initialization
may make the sys-
tem display incorrect
blood glucose values.
To Next Page
Loading...
