Microtech AiDEX - Page 44

40
PDA alarms
Alarm de-
scription
Priority Solution/Action
Low Blood
Glucose
Medium
Perform a finger-tip glucose measurement
using an approved glucose meter to conrm
the sensor glucose reading. If the measure-
ment indicates low blood glucose, please
take actions to raise blood glucose immedi-
ately and call for medical assistance
High Blood
Glucose
Low
Perform a finger-tip glucose measurement
using an approved glucose meter to conrm
the sensor glucose reading. If the measure-
ment indicates high blood glucose, please
take medicine or inject appropriate amount
of insulin according to doctor’s prescription.
Sensor
Expired
Low
Remove the current glucose sensor and
replace it with a new sensor.
Sensor Error Low
Check if the current sensor has peeled off
or partially peeled off from the skin. If yes,
please remove the current sensor and re-
place it with a new sensor. If the sensor is
still rmly attached to the skin, but the Sensor
Error message continue to appear for more
than 30 minutes, Please remove the current
sensor and replace it with a new sensor.
Other
Unspecied
Errors
Low
Please switch off the PDA and restart it. If the
error message continue to appear, please
contact our customer service.