57
IEC60601-1-2 Table 201
Guidance and manufacturer’s declaration – electromag-
netic immunity
The device is intended for use in the electromagnetic environment
specied below. The customer or the user of the device should en-
sure that it is used in such an environment.
Emissions test Compliance
Electromagnetic environment -
guidance
RF emissions
CISPR 11
Group 1
The device uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in near-
by electronic equipment.
RF emissions
CISPR 11
Class B
The device is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-volt-
age power supply.
Harmonic emis-
sions IEC 61000-
3-2
Class A
Move to a place within the normal
operating temperature range and
repeat the test.
Voltage uctua-
tions/Flicker emis-
sions IEC 61000-
3-3
Complies
Repeat test. If you see the same
result, contact your healthcare
professional immediately.
To Next Page
Loading...
