Microtech USB CameraMate - Connecting to the USB Port

Connecting to the USB port:
Connect the USB connector of the USB CameraMate to the USB port located at
the back of the computer. In the case of the Apple iMac or iBook, use the USB ports
located on the side of the computer. Do not use the USB port on the keyboard. Refer to
the illustrations below.
Make sure the cable ends are firmly connected. Be careful not to confuse the upper
and lower parts of the connector. Do not force connections, as this may damage the
computer or the USB CameraMate.
The USB cable may be plugged into the computer while the computer is running.
USER'S
MANUAL
USER'S
MANUAL
USB CameraMate
?
HELP

CONTACT

NEXTBACK

CONTENTS
12
1.
2.
Attach the USB connector from
the USB CameraMate to the
USB port on your Macintosh.
Enlarged view
Enlarged view