6
Select Automatic
Color Restoration
Scanning Film
1. Launch ScanWizard 5. In the Standard
Control Panel, click the Original button.
Choose “Negative Film” to scan negatives,
or choose “Positive Film” to scan slides.
2. Click the Preview button in the Standard
Control Panel to perform a preliminary
scan of the image.
3. Click the Scan to button to scan the
image.
After the scan, the scanned image can be
saved as a file, opened in an image editing
program, sent to a printer, attached in an
e-mail, or saved in the PDF format.
Restoring Color
ColoRescue™ is an automatic color recovery system that restores faded color in
both photos and film to their original luster.
2. In the ScanWizard Settings window,
check the “Automatic Color Restoration”
check box. The next time you scan faded
photos or film, ColoRescue will restore the
faded colors to their original brilliance.
To use ColoRescue:
1. Launch ScanWizard 5. When the
Standard Control Panel appears, click
the Switch icon on the upper right
corner to switch to the Advanced
Control Panel.
Using the Film Holder (cont.)
To Next Page
Loading...
Need help?
General